Skip to content
Lychee Documentation
  • Home
  • About us
  • Contact us
Lychee Documentation
  • Home
  • About us
  • Contact us

J3D-Tech’s Guide to Resin Printing, Beginners - Advanced

  • Lychee Documentation
  • J3D-Tech’s Guide to Resin Printing, Beginners - Advanced
  • My recommended items for 3D printing
  • 09 – Focus

09 – Focus

Coffee Press

Buy from Amazon

Buy me a coffee to help support this guide

«Previous
Next»
  • Introduction
    • Good to know...
  • Printer Installation
    • 01 - Levelling the Bed
    • 02 - VAT Clean after a failed print
    • 03 - Resin Mixing and FEP Squeegee
  • Printer Calibration
    • 01 - Build Plate Calibration
    • 02 - Normal Layer Calibration
    • 03 - Burn-in-Layers / Bottom Layers Calibration
    • 04 - Two Stages Motion Control (TSMC) Calibration
    • 05 - Slice and Export Test Files
    • 06 - Prep your 3D Printer
    • 07 - Boxes of calibration
    • 08 - Calibrated resin profiles
  • Print Settings
    • 01 - Two Step Motion Control (TSMC)
    • 02 - Anti-aliasing
    • 03 - Rafts
    • 04 - Model Sizes
    • 05 - Model Orientation
    • 06 - Introduction to Supporting
    • 07 - Advanced Supporting
    • 08 - Hollowing
    • 09 - Printing on the Plate
    • 10 - The truth about 90% of Failures
  • Post-Processing
    • 01 - Video demo
    • 02 - Build Plate Removal
    • 03 - First Clean
    • 04 - 2nd Clean
    • 05 - 3rd Clean
    • 06 - Support Removal
    • 07 - 4th Clean
    • 08 - Final Dry
    • 09 - Final Cure
    • 10 - Can you Over Cure resin 3D prints?
  • Cleanup and Disposal
    • 01 - Trash
    • 02 - Cleaning your FEP
    • 03 - Emptying and Removing The Vat
    • 04 - Clean your LCD
  • Troubleshooting Print Failures
    • 01 - Layer Lines
    • 02 - Volcanoes
    • 03 - Just the supports
    • 04 - Split-Rafts
    • 05 - Flat rafts and/or Supports stop printing. 
    • 06 - Nothing on the Build Plate 
    • 07 - Half of the prints stuck to the Build Plate
  • Safety
    • Mandatory equipment
  • My recommended items for 3D printing
    • 01 - My Favorite Resin
    • 02 - Heating
    • 03 - Resin Printer Cleaning
    • 04 - Resin Printer Maintenance
    • 05 - Printed Model Post Processing
    • 06 - Consumables
    • 07 - My version of a Wash Station
    • 08 - Power
    • 09 - Focus
  • Ressources / Assets
    • Manufacturer's Resin Profiles
  • Thank You !
    • Thank You !
  • Home
  • About us
  • Contact us

Mango3D

©2024 mango3d.io. All right reserved.